Menu
Your Cart

FREE DELIVERY on ALL products. Shop now!

Lo-Chlor Salt Cell Cleaner - 2.5 Litre

Lo-Chlor Salt Cell Cleaner - 2.5 Litre
Lo-Chlor Salt Cell Cleaner - 2.5 Litre
£37.95
  • Stock: In Stock
  • Model: 2.5lt
  • Weight: 2.50kg
  • SKU: 4M-DY1P-3P5R
  • MPN: LCC-500-0547

Lo-Chlor Salt Cell Cleaner

2.5 Litre

Can be used to clean calcium scale from salt chlorinator cells

Can also be used to clean calcium scale on slatted swimming pool covers

Can also be used to clean calcium scale on pool surrounds

Heavy scale deposit dose rate: 1 part cleaner to 5 parts water

Light scale deposit dose rate: 1 part cleaner to 10 parts water

General
Instructions <p>Cleaning of Salt Chlorinator Cells</p> <p>Turn off the pump, filter and salt chlorinator.</p> <p>Remove the salt chlorinator cell.</p> <p>For best results wash or hose the cell in clean warm water.</p> <p>Fully immerse the cell in a clean plastic container containing Salt Cell Cleaner.</p> <p>Leave for 10-15 minutes or until the cell appears clean.</p> <p>Carefully rinse with fresh water and re-assemble the chlorinator.</p> <p>Whilst Salt Cell Cleaner can be re-used, for the best results with heavy scaling, a fresh solution is<br> recommended.</p> <p>Cleaning of Slatted Pool Covers & Pool Surround</p> <p>Using a clean plastic bucket carefully dilute at the following rates:For heavy scale deposits, use 1 part product to 5 parts water.</p> <p>For light scale deposits, 1 part product to 10 parts water.</p> <p>Apply the resultant solution to the cover using a suitable brush, ensuring maximum coverage of the affected areas.</p> <p>Leave the product on the cover for a maximum of 15 minutes. For older scale deposits further brushing may be required.</p> <p>After 15 minutes thoroughly rinse/wash the treated area with water.</p> <p><strong>Caution:</strong> The product is acidic therefore post treatment always check the pool water balance, and adjust if necessary. Any other pool fabrics that are sensitive to acid, such as marble, chrome, stainless steel, aluminium and enamel should be covered during the application, cleaning, and rinse phases above. This will protect them from any splashes that may occur.</p> <p><strong>N.B.</strong> If you are operating your system in a hard water area, then we recommend use of No More Scale in conjunction with Salt Cell Cleaner.</p>

Write a review

Note: HTML is not translated!
Bad Good